gittrahan /support-fins

★ 997⑂ 149👁 17⑃ 372● 90▤ 8
JavaScriptMITCreated 2026-07-25
下载:v1.0.6v1.0.6 ↓1.0.62026-11-10
+1
日增长
997
stars
149
forks
17
watchers
372
prs
90
issues
8
releases

README

Support Fins

Tip a part on edge, and Support Fins adds the breakaway support fins that make that
orientation printable — baked right into the STL.

Live at printfins.com. Runs entirely in your browser: nothing
uploads, nothing installs, no account.

 Why

Printing a part flat is usually the weakest way to print it. Lying or diagonal layer
orientation tests up to ~3× stronger than standing up. Most people print flat anyway,
because the strong orientation needs supports, and slicer supports scar the surface, waste
plastic, and take longer to pick off than the part took to design.

Designed-in fins fix that, and they beat slicer supports in one way a slicer can't touch:
the support lives in the STL. Upload it anywhere — any printer, any filament, any slicer —
and it still comes out right. A slicer only ever outputs gcode for one machine.

No slicer generates these. OrcaSlicer's whole style list is Grid / Snug / Organic / Tree
Slim / Strong / Hybrid, and none of them modify the mesh or bond to the part on purpose.
The technique isn't new (Slant3D has evangelized designed-in supports for years), but until
now you had to CAD it by hand every time.

 How it works

1. Import an STL, 3MF, STEP or OBJ.
2. Rotate it. You're in control — Support Fins suggests, it never decides for you.
3. It shows you live: overhang count, how many can take a real fin, height, bed contact.
   Point at the load direction, answer one question — _does it pull apart, or does it
   lever?_ — and it scores orientations for strength too.
4. Export. Fins and a bed pad come baked into the STL (or 3MF).

Why you pick the rotation, not the software: "stronger" means nothing without a load
direction, and the geometry doesn't contain one. Turn a solver fully loose and it'll hand
you a part 155 mm tall balanced on a needle with two sail-sized fins — technically optimal,
completely unprintable. (Ours did exactly that.) So the human makes the one call the
software can't, and the software does the rest.

 Status

The web app is live and does the full loop: load, rotate, score, fin, export. The geometry
engine is validated against third-party STLs and pinned by an offline test suite.

Working: overhang detection, bed-reachability, contoured breakaway fin walls, orientation +
load-direction scoring, the combined fin (wall + tines that fuse into the part — the whole
point; see docs/FIN-SPEC.md), optional sway braces that tie tall parts' sides on all
the way up (auto, or click an upright side in Draw), hand-placed gussets that stand off
an upright side to hold up an overhang above it, STL, 3MF, STEP and OBJ import, STL and 3MF export.

Still open: scale-aware fin profiles, and the bed pad on tilted exports.

 Nozzle size and wall lines

Set Nozzle (0.2–2.0 mm) to your printer's nozzle and the support widths follow it;
Wall lines (2 / 4 / 6 / 8) makes walls, wedges and sway braces thicker for tall parts.
The contact tip and tines stay one line wide either way. See
the nozzle guide for the sizes 

Top issues

Latest release

v1.0.6 v1.0.6 2026-11-10
- A part centred on its axes no longer loses walls to a false "inside the part" reading at its centre, like a ball hanging inside a hollow ball.
- Ribs on walls taller than the Brace tall walls height now rise to 85% of the wall instead of half, to stiffen the top, which wobbled on a test print. Those walls take a little more plastic; nothing else changes.

Plugin builds are attached below. Docker: ghcr.io/gittrahan/support-fins:v1.0.6.

Snapshot: 2026-11-16T09:23:14Z · Data license Apache-2.0 · JSON