NawfalMotii79 /PLFM_RADAR
Open-source, low-cost 10.5 GHz PLFM phased array RADAR system
★ 27,419⑂ 6,142👁 354⑃ 83● 100▤ 6
下载:v2.0.2-p0-audit — AERIS-10 Pre-Bringup P0 Audit Closure + FT2232H Timing Relaxv2.0.2-p0-audit ↓v2.0.2-p0-audit2026-04-20
+13
日增长
+143
周增长
+542
月增长
27,419
stars
6,142
forks
354
watchers
83
prs
100
issues
6
releases
README
AERIS-10: Open Source Pulse Linear Frequency Modulated Phased Array Radar
AERIS-10 is an open-source, low-cost 10.5 GHz phased array radar system featuring Pulse Linear Frequency Modulated (LFM) modulation. Available in two versions (3km and 20km range), it's designed for researchers, drone developers, and serious SDR enthusiasts who want to explore and experiment with phased array radar technology.
!AERIS-10 Antenna Array
📡 Overview
The AERIS-10 project aims to democratize radar technology by providing a fully open-source, modular, and hackable radar system. Whether you're a university researcher, a drone startup, or an advanced maker, AERIS-10 offers a platform for experimenting with beamforming, pulse compression, Doppler processing, and target tracking.
🔬 Key Features
- Open Source Hardware & Software - Complete schematics, PCB layouts, firmware, and software available
- Dual Version Availability:
- AERIS-10N (Nexus): 3km range with 8x16 patch antenna array
- AERIS-10E (Extended): 20km range with 32x16 dielectric-filled slotted waveguide array
- Full Electronic Beam Steering - ±45° electronic steering in elevation and azimuth
- Advanced Signal Processing - On-board FPGA handles pulse compression, Doppler FFT, MTI, and CFAR
- Python GUI - User-friendly interface with map integration
- GPS/IMU Integration - Real-time position and attitude correction
- Modular Design - Separate power management, frequency synthesis, and RF boards
🏗️ System Architecture
!AERIS-10 System Diagram
Hardware Components
The AERIS-10 main sub-systems are:
- Power Management Board - Supplies all necessary voltage levels to the electronics components with proper filtering and sequencing (sequencing ensured by the microcontroller)
- Frequency Synthesizer Board - Uses a high-performance Low Jitter Clock Generator (AD9523-1) that supplies phase-aligned clock references for:
- RX and TX Frequency Synthesizers (ADF4382)
- DAC
- ADC
- FPGA
- Main Board containing:
- DAC - Generates the RADAR Chirps
- 2x Microwave Mixers (LTC5552) - For up-conversion and IF-down-conversion
- 4x 4-Channel Phase Shifters (ADAR1000) - For RX and TX chain beamforming
- 16x Front End Chips (ADTR1107) - Used for both Low Noise Amplifying (RX) and Power Amplifying (TX) stages
- XC7A50T FPGA - Handles RADAR Signal Processing on the upstream FTG256 board:
- PLFM Chirps generation via the DAC
- Raw ADC data read
- Hybrid Automatic Gain Control (AGC) — cross-layer FPGA/STM32/GUI loop
- I/Q Baseband Down-Conversion
- Decimation
- Filtering
- Forward FFT
- Pulse Compression
- Doppler, MTI and CFAR processing
- USB Interface
- STM32F746xx Microcontroller - Used for:
- Power-up and power-down sequencing (see Power Management Excel File)
- FPGA communication
- Setup and Interface with:
- Clock Generator (AD9523-1)
- 2x Frequency Synthesizers (ADF4382)
- 4x 4-Channel Phase Shifters (ADAR1000) foTop issues
#150Tests in Morocco14 comments · 2026-05-23#145ADAR1000_AGC.cpp: uint8_t overflow risk in AGC attack underflow guard12 comments · 2026-05-18#175Is the use of GRM0335C1E250JA01D components on the board a mistake?8 comments · 2026-07-07#202PCB layout issue7 comments · 2026-10-08#147Antenna Simulation6 comments · 2026-05-19#186Four questions before I order boards from the current production files3 comments · 2026-08-23#200Add MIT LICENSE text for software (9_Firmware) to match README2 comments · 2026-10-06#195Cross-layer contract tests crash at collection without a C++ compiler, and fail on non-UTF-8 locales2 comments · 2026-09-29
Discussions
#211NEW AERIS-10 READY FOR REVIEW0 comments · 2026-10-26#203The frequency issue of the transmitted signal and the matched filter signal1 comments · 2026-10-09#198Has anyone built this project and proved it is working?1 comments · 2026-10-01#181Can I Proceed this PLFM Radar resources ?2 comments · 2026-08-05#179Android UI for AERIS-10 – Looking for Hardware Testers0 comments · 2026-07-24#166Use this as a weather radar0 comments · 2026-06-12#163SLIP RINGS and STEPPER MOTORS1 comments · 2026-06-03#162Integrating Front-End LNAs for RX Noise Floor Optimization1 comments · 2026-05-31
Latest release
v2.0.2-p0-audit — AERIS-10 Pre-Bringup P0 Audit Closure + FT2232H Timing Relax v2.0.2-p0-audit 2026-04-20AERIS-10 Pre-Bringup P0 Audit Closure + FT2232H Timing Relax Production bitstream for xc7a50t-ftg256-2 closing the 2026-04-20 pre-bringup P0 audit. Key items: a datasheet-accurate FT2232H output_delay (was synthetically over-constrained by ~8 ns in v2.0.1), 400 MHz CIC/MMCM margin fixes, an ADC overrange hold waiver matching the existing source-synchronous pattern, and an MCU refactor removing the redundant SPI T/R path now that the FPGA chirp controller owns per-chirp switching. Timing (2026-04-20, commit ca8c586) | Clock | Period | WNS | WHS | Failing | |---|---|---|---|---| | clk_mmcm_ou